Creative Elastomers offers the seal industry's largest inventory of o-rings, which includes every standard AS568 and ISO 3601 . In addition to standard imperial and metric sizes, creative also carries a wide variety of non-standard sizes. With over 8,000 different o-ring sizes in-stock, we have exactly what you are looking for and we can assure immediate delivery of any size in large or small quantities. we are engaged in manufacturing, supplying and exporting a wide range of O Rings. Under this range, we are providing our clients with Nitrile O Rings, Silicone O Rings , Viton o rings and Neoprene O Rings. Can withstand high compressive loads & temperatures, our offered rings are designed and developed in compliance with the international quality standards. These O Rings are dispatched within committed time, owing to our transportation facility.
O-Rings are manufactured from over 15 different Polymers which include Nitrile (NBR), Fluorocarbon (Viton®), Silicone (VMQ), Fluorosilicone (FVMQ), Polyurethane, PTFE , Natural Rubber (NR), Ethylene Propylene (EPDM), Hydrogenated Nitrile Rubber (H-NBR), Carboxylated Nitrile Rubber(X-NBR), Styrene Butadiene Rubber (SBR), Perfluoroelastomer (FFKM), Chloroprene (Neoprene®).
- Power Generation
- Fluid Power
- Chemicals & Fertilizer Plants
- Hydraulic Fittings
- Hydraulic Cylinders
- Pneumatic Cylinders
- Valves and Pumps
- Plumbing Products
- Dairy/Food Processing
- Earthmoving & Construction Equipment
Standard O-Ring Material Applications
Viton® / FKM:
Fluorocarbon (Viton®) exhibits exceptional resistance to chemicals, oils, temperature extremes (-13°F to +446°F), low compression set, low gas permeability and excellent aging characteristics. Applications include: aircraft engines, automotive fuel handling systems, and chemical processing industries. FKM is also suitable for high vacuum applications. It is not recommended for exposure to ketones, alkalis, and Skydrol® fluids. Custom compounds are available with improved chemical and low temperature resistance.
Nitrile / NBR
Nitrile (Buna-N) is the most widely used elastomer due to its excellent resistance to petroleum products, operating temperature range (-40°F to +257°F) and one of the best performance-to-cost values. It's an ideal material for aerospace, automotive, propane and natural gas applications. Special Hydrogenated Nitrile (HNBR) compounds can improve resistance to direct ozone, sunlight, and weather exposure while increasing temperature range to +300°F.
Ethylene-Propylene / EPDM
EPDM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (-40ºF to +275ºF); but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications.
Fluorosilicone / FVMQ
Fluorosilicone (-75º to +400ºF) combines the good high and low temperature stability of silicones with the fuel, oil, and solvent resistance of fluorocarbons. FVMQ is unparalleled for aerospace fuel systems, auto fuel emission control systems and to meet or exceed government, military, aerospace, automotive, industrial and commercial specifications. However, due to relatively low tear strength, high friction and limited abrasion resistance of these materials, they are generally not used in dynamic applications. They are also not recommended for exposure to brake fluids, hydrazine, or ketones.
Silicone / VMQ
In the Silicone family, you will find compounds which are superior as static seals in extreme temperature conditions. Standard compounds handle operating temperatures -85º to +400ºF. Silicone compounds are popular in food and medical applications because they are very clean and do not impart odor or taste. Special Phenyl silicones can be used down to -148°F.
Neoprene® / CR
Neoprene (-40º to +250ºF) is reasonably priced and features good resistance to petroleum oils, ozone, sunlight and oxygen aging, relatively low compression set, good resilience and outstanding physical toughness. It is the preferred sealing material for the refrigeration industry because of its resistance to ammonia and Freon®.
O-Ring Cord and Custom Extrusions
Our O-Ring Cord is supplied as a continuous extruded cord. O-ring cord can be used to fabricate custom o-rings where the standard sizes are not suitable. Just like our O'Ring products, O'Ring Cord gives you more flexibility when it comes to providing a mechanical gasket for your machines. Available in either metric or standard sizes, we provide O'Ring Cord manufactured from standard elastomers, in various sizes depending on your needs. We also Vulcanize O-rings in many sizes and compounds in house, if you know the O-ring size needed.
Standard cross sections
1.6mm (1/16 inch), 1.78mm (0.070 inch), 2.0mm, 2.4mm (3/32 inch), 2.62mm (0.103 inch), 3.0mm, 3.18mm (1/8 inch), 3.53mm (0.139 inch), 4.0mm (5/32 inch), 4.5mm, 4.76mm (3/16 inch), 5.0mm, 5.33mm (0.210 inch), 5.7mm, 6.0mm, 6.35mm (1/4 inch), 6.99mm (0.275 inch), 8.0mm (5/16 inch), 8.73mm (11/32 inch), 9.5mm (3/8 inch), 10mm, 10.32mm (13/32 inch), 11.11mm (7/16 inch), 11.91mm (15/32 inch), 12.7mm (1/2 inch).
Types of O-ring cords
Extruded square section cords in solid & Sponge rubber
Resistance water , fuel & oil o ring cords
Imperial size o ring cords
Nitrile , Silicone & Viton superior quality cords
Transparent Silicone O ring Cords
Brown Viton o ring Cords
1 mm micro o ring cords
O ring kits
These O-Ring kits contains the O-Rings which is most commonly used size for industrial and automotive application. The O-Ring Kit is ready to use and will give you easy access and storage to whatever size you need.
Creative O-RING KITS ARE AVAILABLE IN THE SPECIFICATIONS BELOW
- 70 NBR Standard O-Ring Kits
- 75 VITON Standard O-Ring Kits
- 70 SILICONE Standard O-Ring Kits
- 75 VITON Metric O-Ring Kits
- 90 NBR Standard O-Ring Kits
- 70 EPDM Standard O-Ring Kits
- 70 NBR Metric O-Ring Kits
- 90 NBR 'BOSS' O-Ring Kits
X-Rings / Quad-Rings
X-Rings, also known as Quad-Rings®, can be used in a wide variety of static and dynamic sealing applications.
The four-lobed design provides twice the sealing surface in comparison to a standard o-ring. The double-seal action requires less squeeze to maintain an effective seal. This reduction in squeeze means less friction and improved seal life.
X-Ring parting lines are between the lobes, away from the sealing surface, thus eliminating the problems of leakage often resulting from a parting line's irregular surface as found on an O-Ring.
X-Rings are designed to outperform a standard O-Ring in rotary seal applications. The four-lobed configuration creates a more stable seal avoiding spiral twisting. This allows the use of a more narrow groove width than a standard O-Ring groove, but can also be used in a standard O-Ring groove.
X-Rings are available in standard O-Rings sizes.
A market leader in manufacturing & exporting world class rubber moulded products & rubber extruded products. Creative is one of the reputed name in the domestic as well as international market due to our emphasis on quality & timely delivery of quality rubber products. We are pioneers in manufacturing export quality rubber extruded products from Silicone & Viton.